Rainscreen System
System Depth = 2 ¼” + Universe Adjustable framing
Joint Width = 5/8”
Joint Width = 5/8”
System Components:
1. ALPOLIC® Panel
2. Universe Panel Extrusion
3. Extruded Snap-in Retainer
4. Extrusion Fastener
5. Spline Angles and Pop Rivets
6. Aluminum Stiffener
7. Structural Adhesive
8. ¼” Thermal Isolator
9. Universe Adjustable Angle Extrusion
10. Adjustable Angle Fastener
11. Adjustable Angle Bracket
12. Thermal Isolator #1
13. Thermal Isolator #2
14. Mineral Wool or Polyisocyanurate Insulation
15. Air and Moisture Barrier
16. Line of Structure
2. Universe Panel Extrusion
3. Extruded Snap-in Retainer
4. Extrusion Fastener
5. Spline Angles and Pop Rivets
6. Aluminum Stiffener
7. Structural Adhesive
8. ¼” Thermal Isolator
9. Universe Adjustable Angle Extrusion
10. Adjustable Angle Fastener
11. Adjustable Angle Bracket
12. Thermal Isolator #1
13. Thermal Isolator #2
14. Mineral Wool or Polyisocyanurate Insulation
15. Air and Moisture Barrier
16. Line of Structure
Notes:
• Pressure equalized rainscreen system.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Air & moisture barrier (15) required for weather tight system.
• Unlimited color choice for extruded snap-in retainer (3).
• System has passed air, water and structural tests.
• Flashing may be required at the base of the system.
• For steel stud construction, 16 gauge min. is required.
• Insulation (14) must be polyisocyanurate or mineral wool in order to be NFPA-285 fire code compliant. If polyisocyanurate is used, the ACM is required to be FR core.
• Pressure equalized rainscreen system.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Air & moisture barrier (15) required for weather tight system.
• Unlimited color choice for extruded snap-in retainer (3).
• System has passed air, water and structural tests.
• Flashing may be required at the base of the system.
• For steel stud construction, 16 gauge min. is required.
• Insulation (14) must be polyisocyanurate or mineral wool in order to be NFPA-285 fire code compliant. If polyisocyanurate is used, the ACM is required to be FR core.