AAMA-508 Rainscreen System
System Depth = 2 ¼”
Joint Width = 5/8”
Joint Width = 5/8”
System Components:
1. ALPOLIC® Panel
2. Universe Panel Extrusion
3. Extruded Snap-in Retainer
4. Extrusion Fastener
5. Spline
6. Weep Sponge Container
7. Weep Sponge
8. Spline Angle and Pop Rivet
9. Aluminum Stiffener
10. Structural Adhesive
11. 1/8” Thermal Isolator
12. EPDM
13. Air & Moisture Barrier
14. Line of Structure
2. Universe Panel Extrusion
3. Extruded Snap-in Retainer
4. Extrusion Fastener
5. Spline
6. Weep Sponge Container
7. Weep Sponge
8. Spline Angle and Pop Rivet
9. Aluminum Stiffener
10. Structural Adhesive
11. 1/8” Thermal Isolator
12. EPDM
13. Air & Moisture Barrier
14. Line of Structure
Notes:
• Compartmentalized and Pressure equalized rain screen system.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Air & moisture barrier (9) required for weather tight system.
• Unlimited color choice for extruded snap-in retainer (3).
• System has passed air, water, and structural tests.
• Flashing may be required at the base of the system.
• For steel stud construction, 16 gauge min. is required.
• Compartmentalized and Pressure equalized rain screen system.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Air & moisture barrier (9) required for weather tight system.
• Unlimited color choice for extruded snap-in retainer (3).
• System has passed air, water, and structural tests.
• Flashing may be required at the base of the system.
• For steel stud construction, 16 gauge min. is required.